مرمت و معماری ایران، جلد ۱۴، شماره ۴۰، صفحات ۰-۰

عنوان فارسی تعیین ویژگی‌های فیزیکی و شیمیایی ملاط سازه پل تاریخی قره کؤرپی(سیاه پل) ماکو
چکیده فارسی مقاله هدف از انجام این مقاله ساختار شناسی ملاط­ سازه پل تاریخی قره کورپی (سیاه پل) شهرستان ماکو جهت تعیین خواص هیدرولیکی یا غیر هیدرولیکی بست آهکی و درنهایت تعیین نسبت بست به سنگ‌دانه و اندازه سنگ‌دانه‌های استفاده‌شده در ملاط موردمطالعه است. این پل از آثار دوره صفوی است و به دلیل اصالت آن و عدم انجام مرمت در طول زمان و نیز ویژگیهای ساختاری آن می تواند در راستای مطالعات مواد تاریخی کمک شایانی کند. اجزاء اصلی ملاط­های تاریخی بست و سنگ‌دانه است که هرکدام باعث ایجاد ویژگی­های خاص و متفاوتی در ملاط ­می­شوند. بخش بست در ملاطهای آهکی شامل دو گونه هیدرولیک و هوایی است اما بخش سنگ‌دانه‌ عموماً با انواع کانی­های سیلیکاتی و گاه کربناتی همراه است. وجه تمایز آهک هیدرولیک و آهک هوایی در نحوه کربناته شدن آن‌ها و همچنین حضور کانی­های سیلیکاتی، آلومیناتی و آهن‌دار است و بطور عمده انواع کانی های دارای سیلیکات‌ کلسیم و آلومینات­ کلسیم در آهک‌های هیدرولیک حضور دارند. برای تحقق اهداف این پژوهش از روشهای FTIR، XRD،XRF و همچنین دانه‌بندی خاک استفاده شد. نتایج حاصل نشان داد که نوع آهک استفاده‌شده به‌صورت غیر هیدرولیک یا آهک هوایی بوده و نوع سنگ‌دانه‌های مورداستفاده غالباً کوارتز و بیشینه گروه اندازه سنگ‌دانه در نمونه ملاط شامل سنگ‌دانه‌های رسی و ریز ماسه­ها هستند که می­تواند ناشی از ضعف ساختاری به دلیل عدم دسترسی به مواد مرغوب حین ساخت یا فرسایش ملاط طی زمان باشد.
 
کلیدواژه‌های فارسی مقاله سیاه‌پل (قره‌کورپی) ماکو، ملاط، آهک، روشهای آنالیز دستگاهی

عنوان انگلیسی Determining the physical and chemical properties of the mortar of the historical Qara-Korpi (Black Bridge) Bridge in Maku
چکیده انگلیسی مقاله In general, lime mortars have two parts: binder and aggregate; that each part of the mortar can be effective in creating various characteristics in the mortar. The binder part is divided into two types of hydraulic and air lime, and the mortar aggregates section mostly includes silicate minerals and sometimes carbonate aggregates. The difference between hydraulic lime and air lime is in the way they are carbonated, as well as the presence of silicate, aluminate and iron-bearing minerals, which are seen in hydraulic lime as calcium silicates and calcium aluminates in the structure of the lime binder. The goals of this article are: A: A brief overview of the properties of lime mortars in order to understand the effect of aggregates and aggregates in the mortar. B: Structural analysis of mortar in order to investigate the hydraulic properties of lime mortar of the case sample of the mortar of QaraKorpi (Black bridge) structure in maku. C: Determination of the size and grading of the historical case sample. According to the obtained results, it was found that the type of lime used is non-hydraulic or air lime and the type of aggregates used is mostly quartz and the maximum size group of aggregates in the mortar sample includes clay aggregates and fine sands, which can be attributed to the destruction of the mortar in Its lifespan or some kind of structural weakness during mortar construction. To achieve the goals of this research, FTIR, XRD, XRF and soil granulation machine were used.
 
کلیدواژه‌های انگلیسی مقاله Black Bridge (Qara-Korpi) maku, mortar, lime, mechanical analysis methods

نویسندگان مقاله حامد یعقوب زاده | Hamed Yagubzadeh


علی نعمتی بابای لو | ali Nemati-Babaylou



نشانی اینترنتی http://mmi.aui.ac.ir/browse.php?a_code=A-10-2379-1&slc_lang=fa&sid=1
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده مرمت
نوع مقاله منتشر شده پژوهشی
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات